My husband and I wanted to add an addition to our home for years before we finally decided to act on the idea. However, we then realized that we desperately needed to update our kitchen, as well. Before we started the remodeling process, we prepared for what we expected: stress. We made sure we cleared our calendars and didn't have any other major commitments during the remodeling process. However, once we began planning the renovations, we quickly learned that we were actually having a lot of fun! The renovation process also went very smoothly and, now that the process is over, we both joke around that it feels "too quiet" in hear without the company of the contractors. I enjoyed t all so much I decided to start a blog to share my remodeling tips to help others who will soon be taking the plunge!
One of the biggest concerns for homeowners with well water is the risk of contamination in the well. Since many chemicals and bacteria can seep into your well water without leaving any odor or flavor behind, this is a significant concern. Wells are susceptible to this type of contamination from many things, including de-icing chemicals, pesticide treatments, animal waste and sewage leaks. Here are some tips for testing and treating your home's well.
When You Should Test
The well company should test the water in the well immediately after drilling. This tells you if there's anything already present in the water that you should be concerned of. Then, once the well has been established and confirmed as safe, you should make sure to test every year for maintenance purposes. If you have any reason to suspect that contamination has occurred, you can test it at any other time as well.
If you want to make sure you're getting the most accurate test results possible, you need to start with a sample that is clean and free of any additional contamination from your hands or the collection container. Work directly with a water testing laboratory to get your specimen bottle. This ensures that it is sterilized and safe.
Turn your tap water on and let the water run for several minutes. This is important, because you may have stagnant water in the pipes. Running the water for this period of time ensures that you are getting a fresh, clean water sample.
Make sure you keep your fingers clear of the collection container's rim. This protects the sample from contamination due to the oil on your fingers. Then, run the water directly into the sample container. If there's a fill line, make sure you put enough into the vial to reach the fill line. If there's no line, aim for about three-quarters full.
Understanding Your Lab Results
In order for your water to be considered safe for consumption, you need to be confident that there is no bacteria. Evaluate your test results carefully to ensure that the water has tested clean. If there is any contaminant showing in the water, run the test one more time. This will tell you if the result was an anomaly or if there is actually contamination. If the second test confirms contamination, then you'll need to work with a water treatment company like Valley Pump Inc to help you purify the water.